a8|官网

                        180
                        SSAB Laser 250C

                        SSAB Laser® 250C

                        Advanced hot rolled structural steel for cold forming, optimized for laser cutting, with a minimum yield strength of 250 MPa.

                        SSAB Laser? 250C is the optimal steel for laser cutting and cold forming, with guaranteed flatness after laser cutting.

                        SSAB Laser® 250C is the result of total production process control. Every step of the way counts, from liquid iron to hot rolled plate and cut to length sheet. The chemical composition with low sulphur, phosphorous and silicon in combination with the perfected hot rolling process create the uniform and smooth microscale surface for optimal laser cutting.

                        SSAB Laser® 250C is dead-flat. Flatness, before and after laser cutting, is guaranteed to ≤ 3.0 mm/m.

                        SSAB Laser® 250C meets and exceeds the requirements of EN 10025-2 for S235J2C+N. Dual material certification and CE marking is available upon request. The SSAB Laser dimensional tolerances exceed the requirements of EN 10051 for hot rolled sheet and EN 10029 for thot rolled plate.

                        The SSAB Laser® product family consists of hot rolled plate and sheet and cold rolled sheet with yield strength levels up to 460 MPa. All products benefit from superior steel cleanliness, well balanced and consistent chemistry, optimized for laser cutting and narrow and consistent dimensional tolerances.

                        Dimension Range

                        SSAB Laser® 250C is available in thickness 2.00 - 30.00 mm and widths up to 1860 mm as cut to length and 3300 mm as plate. Length up to 16 meters as cut to length and 15 meters as plate.

                        Available Standards

                        EN 10025-2

                        EN 10051

                        EN 10029

                        SSAB Laser® 250C

                        SSAB Laser® 250C

                        USED FOR
                        DIMENSIONS
                        STANDARDS
                        DATA SHEET
                        USED FOR

                        Laser cutting

                        Structural

                        DIMENSIONS

                        T: 2 - 30 mm

                        W: Up to 3300 mm

                        L: Up to 16000 mm

                        STANDARDS

                        EN 10025-2

                        EN 10051

                        EN 10029

                        DATA SHEET

                                              game

                                              Real estate

                                              Second-hand housing

                                              aviation

                                              image

                                              Blog

                                              aviation

                                              society

                                              Finance